This design is of a leather journal cover with a snap closure. The design, similar to the journal cover I created in 1994, was large enough to accommodate most spiral-bound sketchbooks that measure 8.5" by 5.5". In this model the journal cover is larger to accommodate an 8.5" by 11" book.
Showing posts with label Pressed Design. Show all posts
Showing posts with label Pressed Design. Show all posts
Monday, May 20, 2013
Design: Journal Cover
Labels:
All-Leather Cover,
Journal Cover,
Pressed Design,
Snap-Closure
Sunday, May 27, 2012
Book: Green Scale Brick
Name: Green Scale BrickSize: Size 1, Brick
Cover: All Leather
Pages: 500 (approxi)
Paper: 75 lb
Estimated Value: $20.00
Description: The Green Scale Brick is an all-leather cover, size 1, "Brick" journal with a tie closure and press work and leather dye elements.
Process:
Bricks are one of the easier journals for me to make and the design is something that I use for experimentation in covers. There's not a lot of cover material in a size 1 journal so I can afford to try new stuff. the different between a size 1 journal and a 'brick' is the number of pages. Bricks will have double the number of pages for an average size journal. For this project the pages are 75 lb, heavy weight 'construction paper' that takes ink, charcoal and paint very well.
Once I had the book block (the bound section of pages) finished and dressed (the edges were cut and the spine rounded), I cut out a piece of 2-3 ounce Craftsman Tooling Leather (from Tandy Leather) and started to lay out the basic space I would have to experiment within.
Then I wanted to get into some cross-hatching for the cover and see what would the effect be with such thin leather.
![]() |
| As you can see, Bricks are wide books. This one measure around 2 inches thick. |
Normally I use 3-4 ounce leather for my books but wanted to try something thinner to see what would happen. Once the grid was put onto the cover and pressed, I started work on the dye process.
Leather dying is a pain. It's the one 'random' factor in making a book that I'm still working on. For this project I wanted to see if I could marble the leather to give it a mottled, lizard-like quality and I think I've achieved it. I left the outer edge the base 'green' color that I used as a reference for what I had to start with when I began altering the colors of the main body.
Once I had the cover dyed and marbled the way I liked it, I added a simple, string closure (mainly because anything too thick would stand out along the center of the book so I kept it thin) that one could tie closed.
For end-papers, I'm experimenting with marbling colored paper. I think it looks need and is kind of cool for a green-covered book.
Thursday, June 23, 2011
BOOK: Sun and Moon Journal
This book was an experiment in leather dying, press-work and soft-covering a larger-sized book.Dimensions:
Size 4 Journal (7 by 9 1/2 inches in size)
Approximately 250 pages
The design is pressed into the leather with a leather-working tool and then the dye is applied to bring out the design. In this case I applied several layers of dye to the moon to bring it out in contrast to the sun design.
This journal also demonstrates the use of leather as a cover material for larger sized books. The leather is somewhat stiff when first used but will eventually loosen up once it's opened a number of times.
Labels:
All-Leather Cover,
Dye,
Pressed Design,
Size 4 Book
Subscribe to:
Posts (Atom)





