Showing posts with label Up-For-Grabs. Show all posts
Showing posts with label Up-For-Grabs. Show all posts

Sunday, March 5, 2017

Leather Covered Burned Brick

This leather covered journal measures 4.75 by 6.75 inches and is roughly an inch thick with over 200 pages of 76 lb, 100% recycled, acid free paper. The journal is equipped with a sliding-bead closure and finished with a thermographic design burned into the front and back covers. The compact size of the journal makes it a easy item to carry with you for day-to-day sketching, journaling or note-taking. The closure is perfect to hold an ink pen or pencil so that you're never without a writing tool when inspiration strikes.

The medieval design would make this item a perfect accessory for members of the Society for Creative Anachronism (SCA) or for those who enjoy fantasy LARPing or Cosplay.

ETSY LINK






Friday, September 21, 2012

Book: Chinese Copper

When I experiment with a technique it doesn't always work out for the best. Sometimes the process, the materials or even the idea is just so wonky that it doesn't want to work out. So when I get an idea to experiment with some new aspect of binding I usually fall back to the trusty composition notebook. Yes, those cardboard-covered notebooks that you can get from the dollar store make excellent test subjects.

Take this recent experiment with the concept of a 'Triple Fold'.  I have made Double Fold books several times and I have been asked if I could ever make a book with three sections. Since I wasn't sure how it would work - or if people would actually want a book with three different sections to it, I decided to give it a go.

The three books are bound one to each other in a long, continuous section so that the inner-most book is hidden within the second book which is then turned inward against the first. Structurally this allows the author to divide their subjects into three separate areas of focus. It could be daily notations, experimental notes and then formulas, for example.

The cover was created by covering the whole book in a layer of brown, kraft paper to give it a single, uniform 'skin'. The skin was then given a coat of green paint to kill the dullness of the natural kraft paper. Once dried I added yellows and browns with sponge painting and then added some copper highlights. I then added some raised elements on the front cover and sunk-in some Chinese-looking scrap booking embellishments to complete the look. The disk item in the center swivels to reveal an open space below where one might put a photo or some other type of decoration unique to the author. The book has no closure because I couldn't think of one that would go with the design. Estimated value: 10-20 dollars.

Thursday, September 20, 2012

New Technique: Laminate Paper Cover

Since most of my experiments use cheap, composition notebooks I don't worry about completely wasting the materials involved. I try and use the cheapest materials to see if the idea will work first and then, once the theory has been proven, try it with better quality materials.

A new technique in creating covers occurred to me and I wanted to try it out. The technique involves covering the boards of the book with multiple layers of thin paper, building it up with washes of glue to fill in the nooks and crannies. The idea, shown right, creates folds and imperfections in the cover which I think add to the overall look. The more of those folds and things the better.

I didn't go crazy with the folds but I could have spent an hour crimping and roughing the paper to make the new texture more pronounced.

 Once I had two layers down and let it dry for a while, I came back and started adding paint to cover over the original material and so that the composition cover couldn't be seen through it.

I will be going over the black layer with lighter and lighter shades of paint to highlight the folds and new texture of the cover.

Pics to follow.
The first layer of black paint to give it a good base.
Sponge-painted, the cover starts to look less like composition notebooks and more like a real book.

 Once I had the book painted and sealed with a layer of pva (polyvinyl acetate) I wanted to add a closure to it. Unfortunately the only ribbon I had was blue but I don't think it looks too bad.

The cover is set with a raised 'picture window' where the author could place a title or subject card to tell what the contents of the book were.

As this was an experimental book I didn't get too fancy with the shape of the title box but it doesn't look too bad; almost like an old lab manual. 

Sunday, May 27, 2012

Book: Green Scale Brick

Name: Green Scale Brick
Size: Size 1, Brick
Cover: All Leather
Pages: 500 (approxi)
Paper: 75 lb
Estimated Value: $20.00
Description: The Green Scale Brick is an all-leather cover, size 1, "Brick" journal with a tie closure and press work and leather dye elements.

Process:

Bricks are one of the easier journals for me to make and the design is something that I use for experimentation in covers. There's not a lot of cover material in a size 1 journal so I can afford to try new stuff. the different between a size 1 journal and a 'brick' is the number of pages. Bricks will have double the number of pages for an average size journal. For this project the pages are 75 lb, heavy weight 'construction paper' that takes ink, charcoal and paint very well.

Once I had the book block (the bound section of pages) finished and dressed (the edges were cut and the spine rounded), I cut out a piece of 2-3 ounce Craftsman Tooling Leather (from Tandy Leather) and started to lay out the basic space I would have to experiment within.

The design for this book started with a simple, quarter-inch border around the cover. It creates a 'framework' in which I can plug any design I want. Once I had the border lined, I added small dots with one of my leather stamps to break up the empty space of the border.

Then I wanted to get into some cross-hatching for the cover and see what would the effect be with such thin leather.

As you can see, Bricks are wide books. This one measure around 2 inches thick.

Normally I use 3-4 ounce leather for my books but wanted to try something thinner to see what would happen. Once the grid was put onto the cover and pressed, I started work on the dye process.

Leather dying is a pain. It's the one 'random' factor in making a book that I'm still working on. For this project I wanted to see if I could marble the leather to give it a mottled, lizard-like quality and I think I've achieved it. I left the outer edge the base 'green' color that I used as a reference for what I had to start with when I began altering the colors of the main body.

Once I had the cover dyed and marbled the way I liked it, I added a simple, string closure (mainly because anything too thick would stand out along the center of the book so I kept it thin) that one could tie closed.

For end-papers, I'm experimenting with marbling colored paper. I think it looks need and is kind of cool for a green-covered book.



Tuesday, March 27, 2012

BOOK: Burnt-Paper Cover

This is a paper-covered book that I added small bits of scorched paper as a decorative element. The spine of the book was covered in leather. I made it small - as an experiment to see if I liked the burnt-paper look - so it's only the size of a "Brick".

The book was created in the summer of 2011.

BOOK: Paper-Covered Book

This was a standard, 'brick' that I covered with decorative "scrap booking" paper and used a complimentary-colored paper for the spine.

The book was completed in Summer 2011